Popular Topics. More from Nikon. Close Window Share this article by email. Your email has been sent. We like sharing articles, too! Sign Up for Emails. Close Window.
Your message is sending. Close Topics A-Z. Most camera manufacturers offer a selection of teleconverters for telephoto or super-telephoto lenses of their own. And usually, the optical layout is made specifically for their lenses. Lens manufacturers like Sigma have teleconverters available for Sigma lenses specifically, but they work on different camera body mounts. There are specific generic or third party converters like the ones made by Kenko. Always check the compatibility between the two before purchasing, though.
You can check some out on Amazon. They are a much cheaper option than what it would cost to buy a separate long lens. It can also be used on multiple lenses, allowing you to change the focal length of many different lenses. It is a great device to extend the sufficient focal length, no matter which lens you use. The magnification varies, but we notice the most common one to be 1.
Longer lenses can sometimes be pretty huge to carry around. A 2X or a smaller device can save your back from some of the strain and damage that a larger lens could bring with it. You can carry fewer lenses if you have a teleconverter in your bag.
This device allows you to keep a minimum focal length of the lens you are using. The most important thing is that using a teleconverter will mean less light. Less light would also mean a decrease in the widest aperture. A large amount of light comes off the edges of the digital sensor during exposure. The teleconverter magnifies the original image created by the lens. This makes only parts of the light affect the sensor.
If you are in low light situations, a teleconverter is probably not the way to go. Teleconverters usually increase the size and weight of the lens. It is challenging to keep the camera still while photographing. You may have to slow down on shutter speed and may also want to keep a tripod handy when using a teleconverter. Depending on the lens to lens. Teleconverters tend to reduce the speed at which your camera will focus.
However, it may be a lower light issue. You may not be able to use the auto-focus feature while using a teleconverter if using a lower-end DSLR camera. It depends on the camera compatibility.
The extenders magnify and multiply the focal length of your lens. They also magnify and multiply any problems your lens has. For example, there are a few aberrations common in some lenses, so they become worse. Your images will suffer in sharpness when adding another set of optics the light has to travel through. To beat this, use your best lens to keep any reduction in image quality to a minimum.
Should you decide to go without a teleconverter, an option would be to crop your picture in the post. You can get away with cropping — but if you want to blow up your images a lot, the converter will be an option to consider. Screw your teleconverter onto the body of your camera and the lens on the other side. Teleconverters can even be stacked. You now have an mm lens. So then, two teleconverters will give you a mm focal length.
Lenses and lens mounts are far more complicated than they used to be, so you can't assume any teleconverter will fit any lens. Far from it. In fact, the list of compatible lenses is often quite short.
The main camera and lens makers to list the lenses their teleconverters are compatible with our guide to the best teleconverters lists compatibility information, where available. However, this information may be harder to check if you buy a cheap, generic third-party teleconverter online, for example. Apart from the loss in maximum aperture, the biggest drawback of teleconverters is a potential loss in image quality. Most camera and lens makers offer teleconverters for use with a small selection of their own telephoto or super-telephoto lenses.
Autofocus, image stabilisation and exposure controls will work as expected too. This teleconverter is ideal for landscape, action, and wildlife photography amongst others.
With a newly improved optical design, that of 7 elements in five groups where one employs an aspherical lens, it is no wonder that this teleconverter achieves superior image resolution and contrast that is unmatched. Using this teleconverter requires that users be extremely anally retentive as it works with lenses that do not have an aperture ring or with Nikon AF-S lenses.
The main reason why it only works with specific lenses is that the teleconverter lacks the mechanical feeler required to couple the exposure meter and the aperture ring. Also referred to as extenders, teleconverters may not be as popular as they were many years ago, but they are still quite useful if applied correctly.
0コメント